(a) the inspecting Party shall inform the Party converting the silo launcher no less than seven days in advance of the commencement of the pouring that it will measure the depth of the
silo launcher in question both before the commencement and after the completion of the process of pouring concrete;
(b) immediately prior to the commencement of the process of pouring concrete, the converting Party shall take such steps as are necessary to ensure that the base of the silo launcher is
visible, and that the depth of the silo launcher can be measured;
(c) the inspecting Party shall measure the depth of the silo launcher prior to the commencement of the process of pouring concrete;
(d) following notification of completion of the procedures provided for in paragraph 4 of this Section, the inspecting Party shall be permitted to measure the diameter of the restrictive
ring, and to remeasure the depth of the silo launcher. The restrictive ring shall not be shrouded during such inspections. The Parties shall agree on the date for such inspections;
(e) for the purpose of measuring the depth of the concrete in the silo launcher, measurements shall be taken from the level of the lower edge of the closed silo launcher door to the base
of the silo launcher, prior to the pouring of the concrete, and from the level of the lower edge of the closed silo launcher door to the top of the concrete fill, after the concrete has hardened;
(f) the results of measurements conducted pursuant to subparagraphs (c), (d), and (e) of this paragraph shall be recorded in written, factual inspection reports and signed by the inspection team leader and a member of the in-country escort;
(g) inspection teams shall each consist of no more than 10 inspectors, all of whom shall be drawn from the fist of inspectors under the START Treaty; and
(h) such inspections shall not count against any inspection quota established by the START Treaty.