PROTOCOL
ON PROCEDURES GOVERNING ELIMINATION OF HEAVY ICBMS
AND ON PROCEDURES GOVERNING CONVERSION OF SILO LAUNCHERS
OF HEAVY ICBMS RELATING TO THE TREATY BETWEEN
THE UNITED STATES OF AMERICA AND THE RUSSIAN FEDERATION
ON FURTHER REDUCTION AND LIMITATION OF
STRATEGIC OFFENSIVE ARMS

bbbbbbb Pursuant to and in implementation of the Treaty Between the United States of America and the Russian Federation on Further Reduction and Limitation of Strategic Offensive Arms, hereinafter referred to as the Treaty, the Parties hereby agree upon procedures governing the elimination of heavy ICBMs and upon procedures governing the conversion of silo launchers of such ICBMs ABA

I. Procedures for Elimination of Heavy ICBMs and TheirLaunch Canisters

bbbbbbb 1. Elimination of heavy ICBMs shall be carried out in accordance with the procedures provided for in this Section at elimination facilities for ICBMs specified in the START Treaty or shall be carried out by using such missiles for delivering objects into the upper atmosphere or space. Notification thereof shall be provided through the Nuclear Risk Reduction Centers (NRRCs) 30 days in advance of the initiation of elimination at conversion or elimination facilities, or, in the event of launch, in accordance with the provisions of the Agreement Between the United States of America and the Union of Soviet Socialist Republics on Notifications of Launches of Intercontinental Ballistic Missiles and Submarine-Launched Ballistic Missiles of May 31, 1988. ABA

bbbbbbb 2. Prior to the confirmatory inspection pursuant to paragraph 3 of this Section, the inspected Party:

bbbbbbbbbb (a) shall remove the missile's reentry vehicles;

bbbbbbbbbb (b) may remove the electronic and electromechanical devices of the missile's guidance and control system from the missile and its launch canister, and other elements that shall not be subject to elimination pursuant to paragraph 4 of this Section;

bbbbbbbbbb (c) shall remove the missile from its launch canister and disassemble the missile into stages;

bbbbbbbbbb (d) shall remove liquid propellant from the missile;

bbbbbbbbbb (e) may remove or actuate auxiliary pyrotechnic devices installed on the missile and its launch canister;

bbbbbbbbbb (f) may remove penetration aids, including devices for their attachment and release; and

bbbbbbbbbb (g) may remove propulsion units from the self-contained dispensing mechanism.

These actions may be carried out in any order. ABA

bbbbbbb 3. After arrival of the inspection team and prior to the initiation of the elimination process, inspectors shall confirm the type and number of the missiles to be eliminated by making the observations and measurements necessary for such confirmation. After the procedures provided for in this paragraph have been carried out, the process of the elimination of the missiles and theirlaunch canisters may begin. Inspectors shall observe the elimination process. ABA

bbbbbbb 4. Elimination process for heavy ICBMs:

bbbbbbbbbb (a) missile stages, nozzles, and missile interstage skirts shall each be cut into two pieces of approximately equal size; and

bbbbbbbbbb (b) the self-contained dispensing mechanism as well as the front section, including the reentry vehicle platform and the front section shroud, shall be cut into two pieces of approximately equal size and crushed. ABA

bbbbbbb 5. During the elimination process forlaunch canisters of heavy ICBMs, the launch canister shall be cut into two pieces of approximately equal size or into three pieces in such a manner that pieces no less than 1.5 meters long are cut from the ends of the body of such a launch canister. ABA

bbbbbbb 6. Upon completion of the above requirements, the inspection team leader and a member of the in-country escort shall confirm in a factual, written report containing the results of the inspection team's observation of the elimination process that the inspection team has completed its inspection. ABA

bbbbbbb 7. Heavy ICBMs shall cease to be subject to the limitations provided for in the Treaty after completion of the procedures provided for in this Section. Notification thereof shall be provided in accordance with paragraph 3 of Section I of the Notification Protocol Relating to the START Treaty. ABA

II. Procedures for Conversion of Silo Launchers of Heavy ICBMs, Silo Training Launchers for Heavy ICBMs, and Silo Test Launchers for Heavy ICBMs

bbbbbbb 1. Conversion of silo launchers of heavy ICBMs, silo training launchers for heavy ICBMs, and silo test launchers for heavy ICBMs shall be carried out in situ and shall be subject to inspection. ABA

bbbbbbb 2. Prior to the initiation of the conversion process for such launchers, the missile andlaunch canister shall be removed from the silo launcher. ABA

bbbbbbb 3. A Party shall be considered to have initiated the conversion process for silo launchers of heavy ICBMs, silo training launchers for heavy ICBMs, and silo test launchers for heavy ICBMs as soon as the silo launcher door has been opened and a missile and its launch canister have been removed from the silo launcher. Notification thereof shall be provided in accordance with paragraphs 1 and 2 of Section IV of the Notification Protocol Relating to the START Treaty. ABA

bbbbbbb 4. Conversion process for silo launchers of heavy ICBMs, silo training launchers for heavy ICBMs, and silo test launchers for heavy ICBMs shall include the following steps:

bbbbbbbbbb (a) the silo launcher door shall be opened, the missile and the launch canister shall be removed from the silo launcher;

bbbbbbbbbb (b) concrete shall be poured into the base of the silo launcher up to the height of five meters from the bottom of the silo launcher; and

bbbbbbbbbb (c) a restrictive ring with a diameter of no more than 2.9 meters shall be installed into the upper portion of the silo launcher. The method of installation of the restrictive ring shall rule out its removal without destruction of the ring and its attachment to the silo launcher. ABA

bbbbbbb 5. Each Party shall have the right to confirm that the procedures provided for in paragraph 4 of this Section have been carried out. For the purpose of confirming that these procedures have been carried out:

bbbbbbbbbb (a) the converting Party shall notify the other Party through the NRRCs:

bbbbbbbbbb bbb (i) no less than 30 days in advance of the date when the process of pouring concrete will commence; and

bbbbbbbbbbbbb (ii) upon completion of all of the procedures provided for in paragraph 4 of this Section; and

bbbbbbbbbb (b) theinspecting Party shall have the right to implement the procedures provided for in either paragraph 6 or paragraph 7, but not both, of this Section for each silo launcher of heavy ICBMs, silo training launcher for heavy ICBMs, and silo test launcher for heavy ICBMs that is to be converted. ABA

bbbbbbb 6. Subject to the provisions of paragraph 5 of this Section, each Party shall have the right to observe the entire process of pouring concrete into each silo launcher of heavy ICBMs, silo training launcher for heavy ICBMs, and silo test launcher for heavy ICBMs that is to be converted, and to measure the diameter of the restrictive ring. For this purpose: ABA

bbbbbbbbbb (a) the inspecting Party shall inform the Party converting the silo launcher no less than seven days in advance of the commencement of the pouring that it will observe the filling of the silo in question; ABA

bbbbbbbbbb (b) immediately prior to the commencement of the process of pouring concrete, the converting Party shall take such steps as are necessary to ensure that the base of the silo launcher is visible, and that the depth of the silo can be measured; ABA

bbbbbbbbbb (c) the inspecting Party shall have the right to observe the entire process of pouring concrete from a location providing an unobstructed view of the base of the silo launcher, and to confirm by measurement that concrete has been poured into the base of the silo launcher up to the height of five meters from the bottom of the silo launcher. The measurements shall be taken from the level of the lower edge of the closed silo launcher door to the base of the silo launcher, prior to the pouring of the concrete, and from the level of the lower edge of the closed silo launcher door to the top of the concrete fill, after the concrete has hardened; ABA

bbbbbbbbbb (d) following notification of completion of the procedures provided for in paragraph 4 of this Section, the inspecting Party shall be permitted to measure the diameter of the restrictive ring. The restrictive ring shall not be shrouded during such inspections. The Parties shall agree on the date for such inspections; ABA

bbbbbbbbbb (e) the results of measurements conducted pursuant to subparagraphs (c) and (d) of this paragraph shall be recorded in written, factual inspection reports and signed by the inspection team leader and a member of the in-country escort; ABA

bbbbbbbbbb (f) inspection teams shall each consist of no more than 10 inspectors, all of whom shall be drawn from the list of inspectors under the START Treaty; and ABA

bbbbbbbbbb (g) such inspections shall not count against any inspection quota established by the START Treaty. ABA

bbbbbbb 7. Subject to the provisions of paragraph 5 of this Section, each Party shall have the right to measure the depth of each silo launcher of heavy ICBMs, silo training launcher for heavy ICBMs, and silo test launcher for heavy ICBMs that is to be converted both before the commencement and after the completion of the process of pouring concrete, and to measure the diameter of the restrictive ring. ABA For this purpose:

bbbbbbbbbb (a) the inspecting Party shall inform the Party converting the silo launcher no less than seven days in advance of the commencement of the pouring that it will measure the depth of the silo launcher in question both before the commencement and after the completion of the process of pouring concrete; ABA

bbbbbbbbbb (b) immediately prior to the commencement of the process of pouring concrete, the converting Party shall take such steps as are necessary to ensure that the base of the silo launcher is visible, and that the depth of the silo launcher can be measured; ABA

bbbbbbbbbb (c) the inspecting Party shall measure the depth of the silo launcher prior to the commencement of the process of pouring concrete; ABA

bbbbbbbbbb (d) following notification of completion of the procedures provided for in paragraph 4 of this Section, the inspecting Party shall be permitted to measure the diameter of the restrictive ring, and to remeasure the depth of the silo launcher. The restrictive ring shall not be shrouded during such inspections. The Parties shall agree on the date for such inspections; ABA

bbbbbbbbbb (e) for the purpose of measuring the depth of the concrete in the silo launcher, measurements shall be taken from the level of the lower edge of the closed silo launcher door to the base of the silo launcher, prior to the pouring of the concrete, and from the level of the lower edge of the closed silo launcher door to the top of the concrete fill, after the concrete has hardened; ABA

bbbbbbbbbb (f) the results of measurements conducted pursuant to subparagraphs (c), (d), and (e) of this paragraph shall be recorded in written, factual inspection reports and signed by the inspection team leader and a member of the in-country escort; ABA

bbbbbbbbbb (g) inspection teams shall each consist of no more than 10 inspectors, all of whom shall be drawn from the list of inspectors under the START Treaty; ABA and

bbbbbbbbbb (h) such inspections shall not count against any inspection quota established by the START Treaty. ABA

bbbbbbb 8. The converting Party shall have the right to carry out further conversion measures after the completion of the procedures provided for in paragraph 6 or paragraph 7 of this Section or, if such procedures are not conducted, upon expiration of 30 days after notification of completion of the procedures provided for in paragraph 4 of this Section. ABA

bbbbbbb 9. In addition to the reentry vehicle inspections conducted under the START Treaty, each Party shall have the right to conduct, using the procedures provided for in Annex 3 to the Inspection Protocol Relating to the START Treaty, four additional reentry vehicle inspections each year of ICBMs that are deployed in silo launchers of heavy ICBMs that have been converted in accordance with the provisions of this Section. During such inspections, the inspectors also shall have the right to confirm by visual observation the presence of the restrictive ring and that the observable portions of the launch canister do not differ externally from the observable portions of the launch canister that was exhibited pursuant to paragraph 11 of Article XI of the START Treaty. Any shrouding of the upper portion of the silo launcher shall not obstruct visual observation of the upper portion of the launch canister and shall not obstruct visual observation of the edge of the restrictive ring. If requested by the inspecting Party, the converting Party shall partially remove any shrouding, except for shrouding of instruments installed on the restrictive ring, to permit confirmation of the presence of the restrictive ring. ABA

bbbbbbb 10. Upon completion of the procedures provided for in paragraph 6 or paragraph 7 of this Section or, if such procedures are not conducted, upon expiration of 30 days after notification of completion of the procedures provided for in paragraph 4 of this Section, the silo launcher of heavy ICBMs being converted shall, for the purposes of the Treaty, be considered to contain a deployed ICBM to which one warhead is attributed. ABA

III. Equipment; Costs

bbbbbbb 1. To carry out inspections provided for in this Protocol, the inspecting Party shall have the right to use agreed equipment, including equipment that will confirm that the silo launcher has been completely filled up to the height of five meters from the bottom of the silo launcher with concrete. The Parties shall agree in the Bilateral Implementation Commission on such equipment. ABA

bbbbbbb 2. For inspections conducted pursuant to this Protocol, costs shall be handled pursuant to paragraph 19 of Section V of the Inspection Protocol Relating to the START Treaty. ABA

bbbbbbb This Protocol is an integral part of the Treaty and shall enter into force on the date of entry into force of the Treaty and shall remain in force as long as the Treaty remains in force. As provided for in subparagraph 2(b) of Article V of the Treaty, the Parties may agree upon such additional measures as may be necessary to improve the viability and effectiveness of the Treaty. The Parties agree that, if it becomes necessary to make changes in this Protocol that do not affect substantive rights or obligations under the Treaty, they shall use the Bilateral Implementation Commission to reach agreement on such changes, without resorting to the procedure for making amendments set forth in Article VII of the Treaty. ABA

bbbbbbb DONE at Moscow on January 3, 1993, in two copies, each in the English and Russian languages, both texts being equally authentic.

FOR THE UNITED STATESbbbbbbbbbbbbbb FOR THE RUSSIAN
OF AMERICA: bbbbbbbbbbbbbbbbbbbbbbbbbFEDERATION: